Resurface laminate countertop – If you have an old bench that is structurally sound but the area is dingy and worn, consider resurfacing instead of replacing. A new layer of the laminate can place over the existing surface to create the appearance of new countertops. You can buy laminate sheets adhering to the surface with contact cement, rapid-bonding chemical adhesives.
How to resurface laminate countertop, sand the existing bench top with a power pad sander, sufficient to de-gloss it. Wipe up the dust. Then measure each part countertop surface and transmit the measurements to the laminate sheet. Add an inch around the perimeter of each measurement. And then using a utility knife, cut out the parts by scoring and snapping the pieces.
12 Photos Gallery of: Resurface Laminate Countertop Ideas
After that to resurface laminate countertop, apply contact cement over the backs of the pieces with a brush. Apply contact cement to the surface of the bench as well. Hold the front cut laminate piece in front where it will attach. Get the right position before allowing any part of it to touch the surface of the bench, given that there will be a 1-inch overhang. Press it into place at once. Do your laminate roll of laminate pressing it in place. Set the control rods of the bench, placed front to back and placed 1 foot apart. Proper positioning of the laminate countertop.