AquaPod Aquarium Systems

Aquapod Products

12 Gallon Aquapod Saltwater Aquarium Kit (2 x 27W PC Lamps)

The Aquapod brings you the ocean...all wrapped up in an elegant 12 gallon aquarium, complete with filtration and lighting. It is easier than ever to enjoy the wonders of the sea right in your living room with this modern and totally complete set-up. Featuring seamless front glass with rounded corners for optimum viewing, plus high-performance ultra-bright lighting to keep a mini-reef healthy. The Aquapod filtration system consists of a surface-skimming system, a mechanical sponge filter, and a submersible pump with flat nozzle. It's all you need to start a beautiful, exciting underwater world. Read more about Setting up a Nano Reef Aquarium at That Fish Blog

24 Gallon Aquapod Saltwater Aquarium Kit (2 x 32W PC Lamps)

The Aquapod brings you the ocean...all wrapped up in an elegant 24 gallon aquarium, complete with filtration and lighting. It is easier than ever to enjoy the wonders of the sea right in your living room with this modern and totally complete set-up. Featuring seamless front glass with rounded corners for optimum viewing, plus high-performance ultra-bright lighting to keep a mini-reef healthy. The Aquapod filtration system consists of a surface-skimming system, a mechanical sponge filter, and a submersible pump with flat nozzle. It's all you need to start a beautiful, exciting underwater world. Read more about Setting up a Nano Reef Aquarium at That Fish Blog

24 Gallon Aquapod Saltwater Aquarium Kit (150W HQI Light)

Go big in your next aquarium venture by going small. "Nano" tanks are the latest trend in aquariums, challenging aquarists to maintain these smaller tanks with strict water parameters and keep small coral "frags." They also make for interesting and striking displays of freshwater fish or specialized saltwater specimen tanks for those hard-to-find rare species.The 24 gallon Aquapod is an ideal system, complete with a bright metal halide light system perfect for corals or plants. Read more about Setting up a Nano Reef Aquarium at That Fish Blog

Stand for 12 Gallon Aquapod

This stylish stand is the perfect final complement to your 12 gallon Aquapod aquarium. Sturdy construction and interesting design is great for any decor. Size: Knockdown stand is 28" high.

Stand for Aquapod - 24 gal.

This stylish stand is the perfect final complement to your 24 gallon Aquapod aquarium. Sturdy construction and interesting design is great for any decor. Size: Knockdown stand is 28" high.

Additional Information

Installation Instructions

NOTE: To comply with the National Electrical Code (NEPA 70), and to provide additional protection from the risk of shock, this unit MUST be connected to a Ground Fault Circuit Interrupter (GFCI) outlet at all times. DO NOT use extension cords. WARNING: To reduce the risk of electrocution, keep all connections dry and off of the ground. DO NOT touch the plug with wet hands.

1. Before removing your AquaPod Aquarium from the box, please note any exterior shipping damage to the box. It is strongly recommended to keep the box and packaging material in the unlikely event there is shipping damage, or if service is required. Inspect glass closely for cracks.
2. Make sure your AquaPod Aquarium is placed on a flat, level surface. If placed on a stand, the stand must be able to hold a maximum weight of 250 lbs. Locate your AquaPod Aquarium in a well-ventilated area. If placing next to a wall, allow 3"-4" of space between the wall and the back of your aquarium.
3. Tilt the lid open. Remove lid by tilting lid to a 90 degree angle and gently slide it off of the hinges. Remove the screws that hold the lamp cover in place and remove lamps. Remove the plastic sleeves over the lamps and remove any additional packaging material and replace lamps. Reattach protective lens by replacing screws. Reinstall lid by placing it at a 90 degree angle and snapping it back into the hinges. Keep lamp sleeves with other packaging materials.
4. To install submersible pump, unwind power cord and slide cord through the notch on the hinged back. Attach the plastic return fitting at the top of the flexible line to the inlet of the flat spray nozzle. Always ensure that an adequate water level is maintained to keep pump submersed. Running pump dry or not submerged will void the warranty.
5. Place mechanical filter sponge block into the filter chamber located under the overflow. Biological filter media (if used) and chemical filter media can be placed in the back open chambers.
6. Once all of the above steps are complete, the AquaPod Aquarium can be filled with water. Open the lid and fill aquarium to just under the frame level.
7. Inspect for any leakage or other damage. IMPORTANT: DO NOT allow the AquaPod submersible pump to run without water at any time.
8. Create a drip loop and plug cords into a GFCI receptacle. Water will begin to flow through the filter.
9. IMPORTANT: When turning on the lights, make sure that the electrical cord that powers the fan is turned on before, and during, lamp operation. This will ensure proper cooling within the hood and eliminate excess heat. When using a timer, it is advised that both lamps be energized at the same time. Another option is to set the timer for the lamps with the cooling fan to "Turn On" 1 hour before the other lamp, and to "Turn Off" 1 hour after the other lamp has "Turned Off."

Adjusting Filter Weirs
The AquaPod is designed with a unique weir overflow system that can be used to effectively filter surface and subsurface water. If desired, the filter plates can be removed to allow more subsurface water to flow through the chamber. The weir can also be blocked, using all of the filter plates to allow surface water to skim over the filter weir. Surface skimming is the preferred method of filtration, as it promotes gas exchange and effectively keeps organics off of the water's surface.

Replacing Lamps

1. WARNING: Unplug all lights before removing the lid and protective splash lens.
2. Tilt the lid open. Remove lid by tilting lid to a 90 degree angle and sliding it off the hinges. Remove the screws that hold the lamp cover in place and remove old lamps. Install new lamps. Reattach protective lens by replacing the screws. Reinstall lid by placing it at a 90 degree angle and snapping it back into the hinges.

Replacing Pump

1. WARNING: Unplug pump and lights before attempting replacement.
2. Tilt the lid open. Remove pump by disassembling return hose from nozzle inlet and sliding old pump out. Remove return hose with fitting and attach to new pump. Slide new pump back into place and reattach the hose to the inlet of the return nozzle. Make sure that the pump is fully submersed before plugging into electrical outlet.

Maintenance
WARNING: Always unplug all of the aquarium's electrical components when performing maintenance.

1. Clean algae from aquarium glass every few days or more depending on water quality. Always use a sponge or scraper specifically designed for aquarium use. Never use any type of soap or other cleaner.
2. Routine 20% water changes should be done once every 2-4 weeks. A gravel siphon should be used to gently clean the substrate. Replace "old" water only with de-chlorinated water. If the aquarium is set up as a marine system, make sure that the water being replaced is salt water mixed at the appropriate salinity.
3. The sponge filter should be removed from the aquarium once every 2 weeks and gently rinsed to remove dirt and debris. Replace after cleaning.
4. If using biological filter media, never wash or clean under chlorinated water. To remove excess debris, remove a portion of the bio-media and place in a small bowl of aquarium water. Gently wash in bowl and place it back into the filter chamber.
5. Once every 6 months, remove the pump and clean the impeller to remove any buildup. Buildup on the impeller can impede proper operation and lower pump flow rate.
6. Once per year, remove and replace the compact fluorescent lamps.

Suggested Timer Operation
Proper timer schedule for the lighting system is important if a 24 hour "Dawn to Dusk" effect is desired. The following is a suggested lighting/timer schedule.

LED Light - ON 24 hours per day
Dual Actinic - ON 13 hours per day

Dual Daylight - ON 11 to 12 hours per day

Timer Progam (7 days per week)

EXAMPLE:
LED Light - ON 24 hours per day
Dual Actinic - ON at 7 am
Dual Daylight - ON at 8 am
Dual Daylight - OFF at 7 pm
Dual Actinic - OFF at 8 pm